Our  Studley Traditional design radiator cover with a G1WB large cross board grille.

The pictures below are our Studley traditional radiator cover which is our demonstration model, we keep a selection of various models in our office for people to come and view the styles, materials and see the quality products we produce.

The radiator cover in the picture below has two separate grille designs on, the left side is a G11AG small clover gold grille and the right is a G6WB small diamond grille design, you can have any of our grille selections including the wooden grilles (Board MDF) and the aluminium choices silver or gold, you can also have the hand made brass grilles (these are not an option in the radiator cover builder at the moment, however we are working on this option), The second picture shows circled in red the lower decorative rail and the smaller circle shows the top curved air vent on the right side.  Build A Studley Radiator Cover


The Studley is a Traditional design with curved feet and top vents to allow the cold air to enter lower down and the hot air to rise from the top vents, the left and right hand vertical side panels have rounded edges as a safety feature with no sharp corners and the shelf has a routed decorative edge with a little more detail than the old england. the lower picture shows the thermostat hatch hole with the hatch removed and a bess handle, the red circle shows the lower decorative rail which is hard to see on this white picture.

radiator cover studley